I used one of the spot markers and it was very thin and adhered well to the table felt. Of course everything was "Made in China", but I found this kit to be very functional and recommend it for cue tip repairs. With the assortment of tip sizes I quickly had the damaged cues back in service.
The long sandpaper guide worked great to sand off the sides of a slightly over-large tip. The adhesive bonds reasonably fast and the clamp (also made from plastic) was easy to use and kept good pressure on the new tip. It sands the remains of a tip and glue on the cue end to a proper flat surface, at the proper angle, ready to glue on a new tip. The disc with sandpaper locks into a guide that fits alongside the cue. To my surprise the kit was easy to use, worked great and had everything I needed. When I purchased this kit to refurbish cue sticks for our Lodge, I didn't expect much for the price. be more consistent in hardness compared to other brands Hardness level: Soft Only available in 12.5 mm diameter Single Virgin by Tweeten 12.5mm Cue Tip. The Elk-Pro tip is manufactured to unprecedented tolerances of shape and hardness by the worlds most respected tip makers, Tweeten Fibre Co.
#Tweeten cue tips pro#
You are tightening a metal nut against the shaft which tightens the internal collet that keeps the machine in place ready to cut the ferrule into the cue dowel.I recommend this kit for glue on pool cue tip replacement. Elk Master PRO Pool Snooker Cue Tips - 10mm SOFT. The kit includes 12 Elk Master 13mm leather tips, a tube of cue tip. In this case, this handy tool enables you to quickly prepare a cue without the need for expensive machinery which means it can be completed at home.Īn additional collet (cue diameter guide) can be purchased from the main stockist to enable cue tips from 11mm to 15mm.Īs an additional note, we would add that it would be good practice to ensure you protect your shaft with an appropriate tape when tightening the Tweeten Cue Tip Ferrule Cutter (Tweeten Tenoning Machine) to ensure you don’t damage the cue shaft surface. The Tweeten billiard home repair kit has all you need to fix or replace tips on cues. Normally ferrules are fitted by the use of a lathe. This is a very simple to use tool which lets you cut the cue neatly ready to take a ferrule. The ferrule cutter will take shaft tips between 6.5mm and 10.4mm in diameter. Tweeten Cue Tip Ferrule Cutter (Tweeten Tenoning Machine). The cue should slide easily into position, if it doesn’t then please re-read the information supplied or advice should be sought.” Tool Description
#Tweeten cue tips professional#
manufacturer of professional quality billiards chalk and cue tips and are proud of our quality and our dedication to the sport. If adequate protection of the shaft isn’t taken, over tightening of the machine, incorrect collet used, forcing cues in the machine are experienced then there is a possibility of cue damage. For over 85 years, Tweeten has been the name to trust in Billiards chalk, cue tips, and accessories. “Snooker Crazy do not take any responsibility for damage to cues when using this machine. The Tweeten Tenoning machine cuts wood from the cue, not metal, and yes, people have tried!” The tips have a medium-hard 78 hardness rating and come in a box of 50. They have a firm yet forgiving feel, extreme control, and traditional style makeup. In no way does it cut metal ferrules off of an existing cue, you will need to remove the ferrules by the conventional method. The Tweeten Le Pro Billiard Pool Cue Tips are made of premium grade proprietary select leather with years of knowledge and research. Before we give a description we would just like to ensure you understand that this tool when correctly described is a ‘Tenoning machine’ made by Tweeten. Please read these points and the tool description before deciding to purchase the tool.
0 kommentar(er)
